Order 818-SCAL for the following cases: a spare /DB calibration module is needed, for 818 series photodiode detectors, without recalibration of the detector, upgrade 818-XX to 818-XX/DB, or 818-XX/CM to 818-XX/DB or when the calibration module is lost or broken.
• To upgrade 818-XX to 818-XX/DB, or 818-XX/CM to 818-XX/DB following will be required:
o Module should be ordered, and sensor sent for calibration.
• For a replacement or spare /DB module, the order requires the following information (at the time of order), to be able to identify the correct calibration file:
o Order for the module and the serial number of the sensor.
o Prior to placing the order check with a Newport calibration center if the calibration data is available.
If not, the sensor should be sent for re-calibration.
Supported sensors:
We recommend that optical power meters and detectors be calibrated every 12 months. It should be noted that Newport cannot assure NIST for modules which were not sent for re-calibration.
Ultra-High Velocity Learn More
