* Table and legs sold separately

ST-UT2 Series

Tuned Damped Optical Table Upgradable to SmartTable^® IQ^® Damping

Field upgradeable to ST Series SmartTable performance
Selectively eliminate torsional and bending table modes
Damped work surface elminates skin resonance
Honeycomb cells for a lighter, stiffer table with better dynamic rigidity
Triple core interface increases point loading capability

< >

Overview
Specifications
Ordering
Drawings
Literature & Downloads

The fully integrated ST Series SmartTable incorporates factory installed IQ dampers. But if you are not sure how much damping your application requires or to prepare for potential changes to your experimental requirements or lab environment, the upgradeable ST-UT2 Series combines Newport’s fine tuned damping with IQ damping. ST-UT2 Series SmartTables tables are field upgradeable to ST Series performance. When the IQ dampers are not installed, the ST-UT2 table provides performance equivalent to the RS2000 Series table. As your application requirements become more stringent, the ST-UT2 table can be field upgraded to SmartTable performance levels by installing an IQ-200-UG upgrade kit. There is no need to dismantle your experiment in order to upgrade the table. Once upgraded, the ST-UT will provide a dramatically quieter table surface, resulting in high quality imaging, improved long term stability, faster settling times and the ability to make measurements that previously required the quietest lab environments. The upgraded ST-UT2 SmartTable also allows users to monitor tabletop vibrations through built in vibration sensors that provide real time feedback on the vibration state of the table.

Working Surface	400 Series ferromagnetic stainless steel 3/16 in. (4.8 mm) thick with integrated damping layer
Surface Flatness [in. (mm)]	±0.004 (±0.1), over 2 ft. (600 mm) square
Core Design	Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. (0.25 mm) Steel sheet materials, 0.030 in. (0.76 mm) Triple core interface
Tuned Damping	Narrowband hydraulic vibration absorbers
Broadband Damping	Constrained layer core, damped working surface and composite edge finish
Mounting Holes	1/4-20 holes on 1 in. grid (M6-1.0 holes on 25 mm grid), 0.5 in. borders (12.5 mm borders)
Hole/Core Sealing	Easy clean conical cup 0.75 in. (19 mm) deep, Non-corrosive high impact polymer material

Typical Table Performance Values	RS-2000
Maximum Dynamic Deflection Coefficient	0.8 x 10^-3
Maximum Relative Motion Value [in. (mm)]*	<8.0 x 10^-9 (<2.0 x 10^-7)
Deflection Under Load [in. (mm)]†	<5.0 x 10^-5 (<1.3 x 10^-3)

Note: All typical performance values are for 12 in. thick tables.

*Calculated and verified by interferometric testing in relatively quiet lab; table on isolators.
†Calculated and verified for a 250 lb (114 kg) load placed in the center of a 12 in. table.

ST-UT2 Series compliance curve. The table resonances are dramatically reduced when damping is enables. This compliance curve is shown for an 8" thick table.

The vibration spectrum of a ST-UT2 Series Smart Table with iQ damping is shown. When the iQ damping system is activated the motion on the table is minimized. iQ damping eliminates the resonances of the table, particularty in the sensitive100-300 Hz range. Additionally, when comparing the ST-UT2 vibration spectrum to the ST vibration spectrum notice that the amplitude is much less in the ST-UT2 series due to the tuned damping.

The iQ damping in the ST-UT2 series dramatically reduces the settling time in an optical table by a factor of 4X

Note: The graphs below should only be used as a guide. For a complete set of unique performance specifications for the table(s) you are interested in, call Newport at 1-800-222-6440.

Model	Description	avail raw	Availability	price raw	Price	Qty. MULTI ADD
IQ-200-UG-12	ST-UT and ST-UT2 Series Active Damping Upgrade Kit for 12 in. Thick Table.	0	In Stock	4242	$4,242.00	ADD
IQ-200-UG-18	ST-UT and ST-UT2 Series Active Damping Upgrade Kit for 18 in. Thick Table.	0	In Stock	4242	$4,242.00	ADD
IQ-200-UG-8	ST-UT and ST-UT2 Series Active Damping Upgrade Kit for 8 in. Thick Table.	0	In Stock	4242	$4,242.00	ADD
M-ST-UT2-410-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x3000x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-410-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x3000x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-410-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x3000x203mm, Metric, M6 Holes					Request Quote
M-ST-UT2-412-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x3600x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-414-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x4200x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-46-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x1800x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-46-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x1800x203mm, Metric, M6 Holes					Request Quote
M-ST-UT2-48-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x2400x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-48-8	M-ST-UT2 Tuned-Damped Upgradable Optical Table, 1200x2400x203mm, Metric, M6 Holes					Request Quote
M-ST-UT2-510-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x3000x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-510-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x3000x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-510-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x3000x203mm, Metric, M6 Holes					Request Quote
M-ST-UT2-512-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x3600x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-514-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x4200x457mm, Metric, M6 Holes					Request Quote
M-ST-UT2-56-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x1800x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-56-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x1800x203mm, Metric, M6 Holes					Request Quote
M-ST-UT2-58-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x2400x305mm, Metric, M6 Holes					Request Quote
M-ST-UT2-58-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 1500x2400x203mm, Metric, M6 Holes					Request Quote
ST-BRKT	ST-200 mounting bracket for use with Newport's 10in dia legs only					Request Quote
ST-UT2-410-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 10 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-410-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 10 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-410-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 10 ft x 8in, 1/4-20 Holes					Request Quote
ST-UT2-412-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 12 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-414-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 14 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-46-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 6 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-46-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 6 ft x 8in, 1/4-20 Holes					Request Quote
ST-UT2-48-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 8 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-48-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 4 ft x 8 ft x 8in, 1/4-20 Holes					Request Quote
ST-UT2-510-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 10 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-510-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 10 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-510-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 10 ft x 8in, 1/4-20 Holes					Request Quote
ST-UT2-512-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 12 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-514-18	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 14 ft x 18in, 1/4-20 Holes					Request Quote
ST-UT2-56-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 6 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-56-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 6 ft x 8in, 1/4-20 Holes					Request Quote
ST-UT2-58-12	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 8 ft x 12in, 1/4-20 Holes					Request Quote
ST-UT2-58-8	ST-UT2 Tuned-Damped Upgradable Optical Table, 5 ft x 8 ft x 8in, 1/4-20 Holes					Request Quote

Isolator Mounting Hole Dimensions

WIDTH (W)	LENGTH (L)	DIMENSION (A)
in. (mm)	ft (mm)	in. (mm)
36.0 (900)	20.0 (6000)	53.0 (1346)
48.0 (1200)	18.0 (5400)	47.0 (1194)
59.1 (1500)	16.0 (4800)	42.0 (1067)
	14.0 (4200)	37.0 (940)
	12.0 (3600)	32.0 (813)
	10.0 (3000)	27.0 (686)
	8.0 (2400)	22.0 (559)
	6.0 (1800)	16.0 (406)

Newport Resource e-Catalogs *

*e-Catalog pages include the most current information available at the time of printing.

Technical References

ST-UT & ST-UT2 Upgrade Instructions (415 KB)

User Manuals

SmartTable Optical Table Users Manual Rev. B (1.5 MB)