Description
Models
Catalog PDF
(Top Left to Right) FPH-C and FPH-CA (mating piece not shown)
(Bottom Left to Right) FPH-S, FPH-J, FPH-DJ, FPH-SR
FPH-S holds 80-200 micron diameter fibers using a unique, stressless spring-leaf assembly- FPH-S-2.5 is a longer version of the FPH-S
- FPH-J is a Teflon-lined chuck that accommodates fibers less than 250 microns in diameter
- FPH-DJ is a Delrin-jawed chuck for large fibers from 300 microns to 1 mm diameter
- FPH-CA Series chucks hold connectorized fibers
|
The FPH-SR Strain Relief prevents inadvertent motion of bare fibers without introducing microbending. All bare fiber chucks ordered from this catalog accommodate this lightweight Delrin strain relief. Simply thread the fiber through it, then screw it on the end of the holder. Its Delrin jaws are relieved to fit around the fiber for a gentle grip.
For cabled fibers FPH Series bare fiber chucks and holders are compatible with the FPH-C Cable Clamp. This compact device slips over the end of the fiber holder and grips fiber cables to relieve any stress applied to the fiber by the weight of the cable. |
| | Model | Description |
|
FPH-C
|
Compact Cable Clamp, FPH Series
|
|
FPH-CA3
|
Fiber Chuck, SMA Connectorized Fiber
|
|
FPH-CA4
|
Fiber Chuck, FC Connectorized Fiber
|
|
FPH-CA6
|
Fiber Chuck, ST Connectorized Fiber
|
|
FPH-CA8
|
Fiber Chuck, LC Connectorized Fiber
|
|
FPH-CA9
|
Fiber Chuck, SC Connectorized Fiber
|
|
FPH-DJ
|
Fiber Chuck, Delrin-Jawed, 300-1000 micron Fiber
|
|
FPH-J
|
Fiber Chuck, Teflon Lined, 250 micron Fiber and Smaller
|
|
FPH-S
|
Fiber Holder, 80–200 micron Fiber
|
|
FPH-S-2.5
|
Fiber Holder, 80–200 micron Fiber, Extended
|
|
FPH-SR
|
Strain Relief, Bare Fiber, Delrin Jaws
|